High Quality Machinery ,Professional Service, Being The Core Supplier In Paper /Plastic Packing Industrial

Home > News > Content
Working Principle Of Punching And Die Cutting Machine
- Jul 10, 2017 -

  Working principle of Punching and Die Cutting Machine

  1 Working principle

  Punching and Die Cutting Machine working principle is the use of die-cutting knives, knives, metal molds, steel wire (or steel plate carved into the template), Punching and Die Cutting Machine through the pressure plates to exert a certain pressure, printing or cardboard rolled into a certain shape. If the entire printing press cut into a single graphic product called die-cutting, if the use of steel wire on the printed product or leave a bend of the groove mark is called indentation; by heating the mold to a certain temperature, printing on the surface of the printed product has a stereo effect of the pattern or font called bronzing; if a substrate is reused on another substrate, it is referred to as a fitting;

  2 Field of work

  Punching and Die Cutting Machine applications:

  1, Adhesive Products: A variety of electronics: Electrical Special Rubber pads, silicone stickers, magic stickers, conductive adhesive, strong double-sided Adhesive, backlight screen, such as electronic industry, IT industry membrane switch, automotive industry used adhesive products.

  2, dustproof material: cosmetic cotton, camera cotton, high-density sponge, filter cotton, dust-proof net, Non-woven fabric.

  3, Shockproof Products: Back to force rubber pads, rubber, Punching and Die Cutting Machine transparent mats, Poron pads, 3M, flame retardant Eva, high foaming.

  4, insulating materials I: Fire fast bar paper, aluminum foil, copper foil, PVC, PET, Kraft, sponge sheath, pearl sheath.

  5, EMI Shielding Materials: Copper foil, aluminum foil, conductive cloth, absorbent material.

  6, Heat insulation: Silicon film, transparent mica, fiber cloth, insulation cotton (cloth).

  7, paper packaging materials: corrugated, wrapping and cardboard.

  3 Work procedures

  Punching and Die Cutting Machine stamping products Note:

  1, before the use or interval of a working period of time, Punching and Die Cutting Machine the machine operating parts of lubricating oil (please add $number special butter);

  2, the use of the process do not use the hand or other parts of the body into the die-cutting area, please use infrared protection device;

  3. Please install and debug the mould in the case of power cut-off;

  4, machine stamping products maximum stamping load does not allow more than the nominal pressure of the machine, long-term load work, reduce machine life, Punching and Die Cutting Machine damage to the fuselage;

  5, work or debugging should follow the gradual, do not card board, such as card board, please immediately stop, troubleshooting after use.